Børresen 05
Børresen 05 er den største gulvstående høyttaleren i «0» serien. Denne høyttaleren fyller rommet og trekker deg i musikken på en helt enestående måte. Med sine seks bass/mellomtone elementer i en 2,5 veis-konstruksjon, har denne høyttaleren en superb kontroll og kapasitet. Båndiskanten sørger for fantastisk luftighet og oppløsning. Dette er en prisvinnende høyttaler og et mesterverk!
Børresen overlater ingenting til tilfeldighetene og lager sine egne drivere.
Mellomtone- og bassmembranene er bygget opp i en såkalt "sandwich-kontraksjon", hvor to lag av karbonfiber limes sammen for å gjøre membranen så stiv og lett som mulig. Det hele drives av kraftige neodymium magneter, N52, for maksimal kontroll og hurtighet.
Bånddiskanten er heller intet unntak. Denne produseres på fabrikken i Ålborg og er bygget opp av nylon/aramid legeringer dekket med aluminium. Det fascinerende med denne sammensetningen er at selve membranen kun veier 0.01g og er stabil opp til 600 C°. Kombinert med en meget kraftig neodymium magnet, gir dette en båndiskant som kan bevege seg utrolig raskt, og få frem selv de minste detaljer med suveren presisjon.
De akustiskformede kabinettene i valnøtt finish demper uønskede resonanser og oppbygging av trykk. Børresen har bak hver mellomtone og bassdriver en diffusor, som sprer lufttrykket og sender det videre ut gjennom anti-turbulens portene bak på kabinettet. Resultatet er et optimalt arbeidsmiljø, hvor hver enkelt driver kan bevege seg fritt uten uønsket motstand.
Danske Børresen lager ikke bare fine høyttalere - de lager musikalske kunstverk. Med Michael Børresen i spissen har de en utrolig egenskap til å lage gode lydprodukter. Samme mann står også bak både Aavik forsterkere og Ansuz kabler - så her kan man få en totalpakke som er direkte skapt for å passe sammen, hvis man ønsker det.
I vår butikk har vi et eget demorom dedikert til Børresen, hvor du kan lytte til høyttalerne og et bredt utvalg fra de nevnte merkene.
Ta gjerne kontakt med en av våre selgere dersom du ønsker en demo eller har spørsmål
Tweeter:
The BØRRESEN planar ribbon tweeter is an entirely new technical development. Elaborate finite element methods have been applied to linearize and optimize the magnetic flux field, to facilitate driver movement and to ensure high efficiency and outstanding linearity.
The efficiency of this closed ribbon tweeter amounts to an exceptional 94dB and operates from approximately 2.5 KHz upwards. The moving mass is extremely low at 0.01 grams. The totally concealed tweeter has the capacity to operate at an incredible speed, which is an absolute prerequisite to unlocking the most subtle and refined sound details of any kind of music. The enormous robustness of this tweeter allows it to handle extremely high transient peaks without any ear fatiguing breakups. No transformers are being used.
Membrane:
The BØRRESEN membrane consists of a composite of two layers of very thin carbon on both sides of a 4 mm Nomex honeycomb core. This composite structure - similar to the one used in formula 1 type of racing cars - provides the ultimate combination of stiffness to weight ratio. The exceptionally low weight of only 5.5 grams allows a very high acceleration factor in the driver, resulting in both outstanding resolution and higher efficiency.
Bass/midrange, the ironfree revolution:
The BØRRESEN magnet system* is breaking new ground. Its unique, innovative and unprecedented technological design makes it stand out from anything else on the loudspeaker market.
Since the invention of the loudspeaker driver, the fundamental structure of magnet systems has not changed. Iron has been used to concentrate the magnetic flux in a narrow gap where the voice-coil is located. Iron is suited for the concentration of flux, but also poses some challenging issues when it comes to the voice-coil parameters. These parameters also change with the position of the voice-coil, creating considerable iron distortion.
Since the invention of the loudspeaker driver, the fundamental structure of magnet systems has not changed. Iron has been used to concentrate the magnetic flux in a narrow gap where the voice-coil is located. Iron is suited for the concentration of flux, but also poses some challenging issues when it comes to the voice-coil parameters. These parameters also change with the position of the voice-coil, creating considerable iron distortion.
The BØRRESEN magnet motor is breaking new ground here. It is uniquely designed without the use of any iron. In the BØRRESEN magnet motor, 4 opposing neodymium ring-magnets are used to squeeze the flux lines together over two solid copper discs, which now act like pole pieces.
The BØRRESEN magnet system has a high flux of 1.1 Tesla. The solid copper pole rings act as very effective heat sinks. This endows the loudspeaker driver with a very high power handling capacity. The copper pole rings also reduce voice-coil inductance to an exceptionally low value of 0.04 MH (less than 10% of regular standard drivers).
The extremely low induction provides the driver with some very desirable attributes that enormously elevate the quality of acoustic performance. A much lower induction means a much faster driver, with no lag. This impacts the overall loudspeaker performance which now becomes much more refined and very detailed. Lower induction also causes less resonance impedance variation, which means less phase angles and less impedance variation for the driving amplifier. Lower induction will also curb the impedance rise over system resonances. In terms of musicality, this will extremely foster a sound base that is less boomy but much more pristine. Bass performance becomes very tight, well focused and more authentic.
*The BØRRESEN magnet system is patented
Bass/midrange, the silver Supreme edition (optional):
The BØRRESEN Silver Supreme Edition loudspeakers represent the absolute flagship version among the BØRRESEN loudspeakers.
The patented BØRRESEN magnet motor has been further refined. Since silver has turned out to have the highest specific electrical conductivity of all metals, we replaced the copper pole rings by in-house manufactured, handcrafted silver rings. As a result, induction could be reduced to a stunning, so far unprecedentedly low level.
To take full advantage of all the performance enhancing audio properties of the new Silver Supreme Edition, all metal components of this premium loudspeaker series are subjected to a cryogenic treatment. This reduces their inductance further.
The result is absolute musical purity. With their unadulterated authencity of musical reproduction, these premium loudspeakers set a new and unsurpassed standard – clarity, refinement and soundstaging at its very best.
Crossover:
BØRRESEN loudspeakers are fitted with a serial crossover configuration. The reason for this is that the drivers share the very same flow of electric current in the crossover region. As a result, the electric current is phase-locked over the crossover region.
Unlike standard parallel filtering, where each driver receives its own frequency and phase content, the new serial filters work by diverting out-of-band currents around the current flows, thus creating a much more coherent system. This unrivaled and innovative technological approach takes your music into a new echelon of acoustic delight.
For the crossover filter, we went to great lengths to source the very best and most sophisticated state-of-the-art components. The coils are foil types wound with paper isolation and impregnated with resin under vacuum to make them mechanically extremely solid and stable.
For crossover capacitors, we use arrays of small military spec stack-foil types. They have the best mechanical stability and lowest induction of any type of capacitor on the market (and they sound wonderful, too).
For tweeter attenuation resistors, we use metal strip types since they have, by far, the absolutely lowest noise figures and additionally, a very low thermal variation.
Cabinets:
The cabinets are heavily braced, block milled, compressed wood structures, beautifully veneered in walnut and fitted with solid walnut inserts. They follow the best of Danish furniture design traditions paired with the stylish shapes that were initially created by the late Franco Serbelin from Sonos Faber.
The tweeter section is vented to balance out the build-up of air pressure. The bass sections consist of tuned ports calibrated for musically relevant frequencies.
Stands / feet:
Ansuz Darkz decouplers have been designed to ensure a distinctly better mechanical grounding of the speaker cabinet to the stand, respectively to the floor. Ansuz Darkz consist of 3 discs separated by 3 titanium ball bearings. Ansuz Darkz are available in 4 alloys that allow for different sonic levels of grounding qualities.
BØRRESEN 01 stand-mounted loudspeakers
There are three cavities in the surface of the upper plate of stand that accommodate built-in Darkz resonance control decouplers between the loudspeakers and the plate. The feet of the stand are designed to sit on Darkz decouplers of individual choice.
BØRRESEN 02 - 05 floor-standing loudspeakers
The floor-standing loudspeakers have built-in Ansuz Darkz T2S resonance control decouplers fitted between the loudspeakers and the ground cross plate. The adjustable feet of the ground cross plate are designed to sit on Darkz decouplers of your choice.
Spesifikkasjoner:
Frekvens respons: 25-50 000hz
Sensitivity: 90db
Impedanse: 5ohm
Recommended amplifier: 50w eller mer
Dimensjoner: 155x30,5x58cm (HxBxD)
Vekt: 75kg